MSA altair 4x - Page 2

EC Declaration of Conformity
MSA
ALTAIR 4X
GB
3
EC Declaration of Conformity
Manufactured by: Mine Safety Appliances Company
1000 Cranberry Woods Drive
Cranberry Township, PA 16066 USA
The manufacturer or the European Authorized Representative:
MSA AUER GmbH
Thiemannstrasse 1
D-12059 Berlin
declares that the product
ALTAIR 4X
based on the EC-Type Examination Certificate:FTZU 07 ATEX 0169 X
complies with the ATEX dire
ctive 94/9/EC, Annex III. Quality Assurance Notification
complying with Annex IV of the ATEX Directive 94/9/EC has been issued by Ineris ,
Notified Body number: 0080.
Standards: EN 60079-0:2009, EN 60079-1:2007, EN 60079-11:2012,
EN 60079-18:2009, EN 60079-26:2007, EN 50303:2000
EN 60079-29-1:2007, EN 50271:2010, EN 50104:2010
The product is in conformance with the directive 2004/108/ EC, (EMC):
EN 50270:2006 Type 2 , EN 61000 - 6 - 3:2007
The product is in conformance with the directive 2010/68 EC, (MED):
EC-Type Examination Certificate: 213.048 Notified Body number: 0736
The product is in conformance with the directive 2006/66/EC.
MSA AUER GmbH
Dr. Axel Schubert
Manager R&D Instruments
& Approvals INT-T
Berlin, April 2014
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it
- info@fasit.it