ALTAIR 4X
GB
9
Observe proper battery maintenance
Use only battery chargers made available by MSA for use with this device; other
chargers may damage the battery pack and the device. Dispose of in accordance
with local health and safety regulations.
Use of the GALAXY GX2 Automated Test System is an alternate approved method
for charging ALTAIR 4X devices.
Be aware of environmental conditions
A number of environmental factors may affect the sensor readings, including
changes in pressure, humidity and temperature.
Pressure and humidity changes also affect the amount of oxygen actually present
in the atmosphere.
Be Aware of the Procedures for Handling Electrostatically Sensitive
Electronics
The device contains electrostatically sensitive components. Do not open or repair
the device without using appropriate electrostatic discharge (ESD) protection. The
warranty does not cover damage caused by electrostatic discharges.
Be Aware of the Product Regulations
Follow all relevant national regulations applicable in the country of use.
Be Aware of the Warranty Regulations
The warranties made by Mine Safety Appliances Company with respect to the prod-
uct are voided if the product is not used and maintained in accordance with the in-
structions in this manual. Please protect yourself and others by following them. We
encourage our customers to write or call regarding this equipment prior to use or for
any additional information relative to use or service.
1.4 Warranty
Specific battery run-time over temperature is not warranted.
ITEM WARRANTY PERIOD
Chassis and electronics Three years
All sensors unless otherwise specified Three years
XCell EX-H Sensor One year
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it
- info@fasit.it
To Next Page
Loading...
