MSA ALTAIR 5X PID - Page 35

ALTAIR 5X PID
35
Operation
US
Setting Cal Due Options
(1) Press the q button to enter setup.
(2) Press the T or S button to enable/disable this option.
(3) Press the q button to confirm.
(4) After confirmation the device prompts the user to enter the number of days for the reminder.
(5) Change number of days by pressing the T or S button.
(6) Press the q button to go to the next menu.
Setting Last Cal Date
(1) Press the q button to enable/disable this option.
(2) Press the T button to go to the next page.
(3) Press the S button to go to the previous page.
Setting Calibration Password
(1) Press the q button to enable/disable this option.
(2) Press the T button to go to the next page.
(3) Press the S button to go to the previous page.
Back To Main Menu
(1) Press the q button to go to Device Setup Menu
Z The Cal Options screen displays
(2) Press the T button to go to the next (Alarm options) or the S button to exit the Setup menu.
Alarm Setup
The Alarm Options Menu allows the user to:
- enable/disable the vibrating alarm
- enable/disable the audible alarm (horn)
- enable/disable the Alarm LEDs
- enable/disable the MOTIONALERT SELECTION page.
If disabled, the user cannot change the device MotionAlert setting.
- set Sensor Alarms.
Press
- the T button go to next page
the S button to go previous page
the q button to enter setup.
Setting Vibrating Alarm
Press the q button to enable/disable this option.
Setting Horn Alarm
Press q button to enable/disable this option.
Setting LED Alarm
Press q button to enable/disable this option.
ALARM OPTIONS