MSA General Monitors OBSERVER-i - Command #152: Read Run Time Meter; Command #154: Set Event Index

OBSERVER-i HART
19
Code
Class
Description
6 – 127
Undefined
10.14 COMMAND #152: READ RUN TIME METER
This command reads the internal run time meter.
Request Data Bytes
Byte
Format
Description
0
N/A
N/A
Response Data Bytes
Byte
Format
Description
0 – 3
Unsigned-32
Run Time Meter Value
Command-Specific Response Codes
Code
Class
Description
0
Success
No Command-Specific Errors
1-127
Undefined
10.15 COMMAND #154: SET EVENT INDEX
This command sets the index of logged event to read. 0 – latest event.
Request Data Bytes
Byte
Format
Description
0
Unsigned – 8
Sets index of logged event to read using commands 143, 145-148
and 156. Range 0 – 9.
Response Data Bytes
Byte
Format
Description
0
Unsigned – 8
Event Index