MSA General Monitors OBSERVER-i - Command #192: Do Calibration; Command #195: Do Acoustic Test

OBSERVER-i HART
27
10.26 COMMAND #192: DO CALIBRATION
This command initiates calibration mode.
Request Data Bytes
Byte
Format
Description
0
N/A
N/A
Response Data Bytes
Byte
Format
Description
0
N/A
N/A
Command-Specific Response Codes
Code
Class
Description
0
Success
No Command-Specific Errors
1 - 15
Undefined
16
Error
Access Restricted
17 - 127
Undefined
10.27 COMMAND #195: DO ACOUSTIC TEST
This command initiates Acoustic Test mode.
Request Data Bytes
Byte
Format
Description
0
N/A
N/A
Response Data Bytes
Byte
Format
Description
0
N/A
N/A
Command-Specific Response Codes
Code
Class
Description
0
Success
No Command-Specific Errors
1 – 15
Undefined
16
Error
Access Restricted
17 – 127
Undefined