MSA General Monitors OBSERVER-i - Command #155: Get Event Index; Command #156: Read Calibration Event Log

OBSERVER-i HART
20
Command-Specific Response Codes
Code
Class
Description
0
Success
No Command-Specific Errors
1 – 2
Undefined
3
Error
Passed Parameter Too Large
4
Undefined
5
Error
Too Few Data Bytes Received
6 – 127
Undefined
10.16 COMMAND #155: GET EVENT INDEX
This command reads the event logged index.
Request Data Bytes
Byte
Format
Description
None
N/A
N/A
Response Data Bytes
Byte
Format
Description
0
Unsigned – 8
Event index
Command-Specific Response Codes
Code
Class
Description
0
Success
No Command-Specific Errors
1-127
Undefined
10.17 COMMAND #156: READ CALIBRATION EVENT LOG
This command reads the Calibration Event Log as specified by the event log number. Event 0 is the
most recent event. Event 1 is the one just before that and so forth.
Request Data Bytes
Byte
Format
Description
None
N/A
N/A