MSA Ultima X Series User Manual

Appendix: HART Specific InformationMSA
ULTIMA X
®
Series
GB
105
Command #129: Read Sensor Gas Type
Reads the Gas Type of the sensor currently connected to the ULTIMA Gas Monitor.
Request Data Bytes
None.
Response Data Bytes
Command #130: Read Device Real Time Clock
Reads the Real Time clock hours and minutes from the ULTIMA X Gas Monitor.
Request Data Bytes
None.
Response Data Bytes
Command #131: Read Alarm Setpoints
Reads the ULTIMA X Alarm Setpoint values.
Request Data Bytes
None.
Response Data Bytes
188 Write Relay Normal State
Byte Format Description
0-3 ASCII Sensor gas type description
[ Table 13.8]
Byte Format Description
0 Unsigned RTC Hours
1 Unsigned RTC Minutes
Byte Format Description
0-3 Float Alarm 1 Setpoint Value
4-7 Float Alarm 2 Setpoint Value
8-11 Float Alarm 3 Setpoint Value
Command # Description

MSA Ultima X Series Specifications

General

Brand	MSA
Model	Ultima X Series
Category	Measuring Instruments
Language	English