49 MTS_OW100_IFU-orthogold100-US-K182682_A
Setting the frequency
With the arrow buttons you choose the acoustic wave frequency in the field “Frequency”.
Pressing one of the arrow buttons increases (> right arrow) or decreases (> left arrow) the
frequency. You can choose from 0.5 to 8 Hz.
Figure 36
Setting the frequency at the display
Pre-setting of the acoustic wave numbers
Pressing the arrow keys in “Interval” allows you to preselect the total shot numbers for
a treatment. Only the preset number of acoustic waves will be applied. Pressing the
left arrow button decreases the shot interval, whereas pressing the right arrow button
increases the shot interval. The interval range is 0-2000, interval increments are 100
acoustic waves. A maximum interval of acoustic waves that can be pre-selected is
2000 acoustic waves,
To Next Page
Loading...
Need help?
General
