7.16.4 Charge-air coolant – Filling
Preconditions
☑ Engine is stopped and starting disabled.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Coolant
Sealing ring
(→ Spare Parts Catalog)
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
CAUTION
Cold coolant in hot engine can cause thermal stress.
Formation of cracks in components!
• Fill / top up coolant only into cold engine.
Preparatory steps
1. Turn breather valve of coolant expansion
tank counterclockwise to the first stop and
allow pressure to escape.
2. Turn breather valve counterclockwise and
remove.
MS150049/02E 2012-11 | Task Description | 123
TIM-ID: 0000007013 - 003
To Next Page
Loading...
