EasyManua.ls Logo

MTU 16 V 4000 C21 - Maintenance; Maintenance task reference table [QL1]

MTU 16 V 4000 C21
155 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Maintenance
5.1 Maintenance task reference table [QL1]
The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The
Maintenance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task Option Maintenance tasks
W0500 Check engine oil level. (→ Page 103)
W0501 Visually inspect engine for leaks and general condition. (→ Page 43)
W0502 X Check intercooler drain(s). (→ Page 99)
W0503 Check signal ring position of service indicator on air filter. (→ Page 102)
W0504 Check relief bores of HP fuel pump. (→ Page 43)
W0505 Check relief bores of water pump(s). (→ Page 117)
W0506 Check engine for abnormal running noises, exhaust color
and vibrations .
(→ Page 43)
W0507 X Drain water and contaminants from fuel prefilter. -
W0508 X Check reading on differential pressure gage of fuel prefil‐
ter.
-
W0525 Check battery-charging generator for contamination, clean
as necessary.
(→ Page 130)
W1001 Replace fuel filter or fuel filter element. (→ Page 98)
W1003 Check belt condition and tension, replace if necessary. (→ Page 128)
W1006 Replace fuel injectors. (→ Page 91)
W1009 X Check layer thickness of oil residue, clean and replace fil‐
ter sleeve of centrifugal oil filter (if fitted) at every oil
change, at the latest.
(→ Page 110)
W1011 Perform endoscopic examination of combustion chambers. (→ Page 74)
W1036 Replace coolant filter. (→ Page 118)
W1046 Crankcase breather: Replace filter or filter element. (→ Page 78)
W1047 X Check and clean oil indicator filter. (→ Page 108)
W1164 Replace filter element and sealing ring depending on de‐
gree of contamination, when the limit (years) is reached, at
the latest.
-
W1207 Check valve clearance, adjust if necessary. Attention!First
adjustment after 1,000 operating hours!
(→ Page 85)
W1463 Check general condition of engine mounting (visual inspec‐
tion).
(→ Page 127)
W1481 Replace supplementary fuel filter or filter element of sup‐
plementary fuel filter.
-
W1697 X Check carbon brushes at flywheel, replace if necessary. (→ Page 81)
MS150049/02E 2012-11 | Maintenance | 47
TIM-ID: 0000034281 - 002

Table of Contents

Related product manuals