9.2 Index
A
Abbreviations 144
After stopping the engine 45
Auxiliary materials 17
B
Battery-charging generator
– Check 130
– Drive belt tension adjustment 135
Battery-charging generator
– Drive belt and belt tensioner replacement 133
Battery-charging generator – Condition check 129
Battery-charging machine
– Removal and installation 131
C
Centrifugal oil filter
– Cleaning 110
– Filter sleeve replacement 110
Charge-air coolant
– Change 121
– Drainage 122
– Filling 123
– Level check 120
Charge-air coolant level
– Check 120
Charge-air coolant pump
– Relief bore check 126
Charge-air cooler
– Check water drain for coolant leakage and absence of
restrictions 99
Cold start system with ether injection
– Check 101
Compressor
– Check 139
Contact persons 147
Coolant
– Change 121
Coolant - charge air
– Level check 120
Coolant filter
– Replacement 118
Crankcase breather
– Filter element replacement 78
Crankcase breather (open-circuit crankcase ventilation
– Filter element cleaning 80
Crankshaft transport locking device
– Removal/installation 8
– With flanged-on generator
– Removal/assembly 11
Cylinder
– Designation 20
Cylinder head cover
– Removal and installation 89
Cylinder liner
– Endoscopic examination 74
D
DDEC and connectors – Cleaning 141
DDEC – Checking plug-in connections 143
Drive belt
– Condition check 128
E
Engine
– Barring with starting system 73
– Barring manually 72
– Main dimensions 39
– Start in manual mode 42
– Stopping in manual mode 44
– Wiring check 140
Engine coolant
– Change 113
– Draining 114
– Filling 115
– Level check 112
– Sample extraction and analysis 119
Engine coolant pump
– Relief bore check 117
Engine data 12 V 4000 C10, C10R, C11, C11R 26
Engine data 12 V 4000 C20, C20R, C21, C21R 32
Engine data 16 V 4000 C10, C11, C11R 29
Engine data 16 V 4000 C20, C20R, C21, C21L 35
Engine mounting
– Check 127
Engine oil
– Analysis 106
– Sample extraction 106
Engine oil
– Change 104
Engine oil filter
– Replacement 107
Engine oil level
– Check 103
Engine side
– Designation 20
Engine wiring
– Check 140
Engine – Overview 21
Environmental protection 17
F
Fan drive
– Adjust and check drive belt tension 136
– Drive belt replacement 138
Fault messages from DDEC engine governor 52
Fire prevention 17
Firing order 38
Fluids and lubricants 17
Fuel filter
– Replacement 98
Fuel system
– Venting 97
154 | Appendix B | MS150049/02E 2012-11
DCL-ID: 0000017488 - 004
To Next Page