7.4 Running Gear
7.4.1 Grounding device – Check carbon brush
Preconditions
☑ Engine shut down and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Cold cleaner (Hakutex 60)
50602
Carbon brush
(→ Spare Parts Catalog)
WARNING
Compressed air
Risk of injury!
• Do not direct compressed-air jet at persons.
• Wear protective goggles / safety mask and ear protectors.
CAUTION
Unsuitable cleaning tool.
Damage to component!
• Observe manufacturer's instructions.
• Use appropriate cleaning tool.
Remove grounding assembly
1. Remove screws (1) with washers.
2. Remove grounding device (2) from flywheel
housing (3).
MS150049/02E 2012-11 | Task Description | 81
TIM-ID: 0000033357 - 003
To Next Page
Loading...
