Flashi
ng
code
PID SID FMI Description Maintenance tasks
84 153 1 Crankcase pressure too low
(version 27.0 or later).
Contact Service.
85 190 0 Engine speed too high. Contact Service.
85 190 14 Engine overspeed signal
(version 28.0 or later).
Contact Service.
86 73 3 Pump pressure sensor, in‐
put voltage too high.
Contact Service.
86 108 3 Atmospheric pressure sen‐
sor, input voltage too high.
Contact Service.
87 73 4 Pump pressure sensor, in‐
put voltage too low.
Contact Service.
87 108 4 Atmospheric pressure sen‐
sor, input voltage too low.
Contact Service.
88 20 1 High range: coolant pres‐
sure too low.
Contact Service.
88 109 1 Coolant pressure too low. Contact Service.
89 95 0 Fuel differential pressure
too high.
Contact Service.
89 111 12 Coolant level, maintenance
indication, fault.
1. Check engine coolant level
(→ Page 112).
2. Contact Service.
MS150049/02E 2012-11 | Troubleshooting | 71
TIM-ID: 0000003162 - 002
To Next Page
Loading...
