Multiplex FreshBlender User Manual

Part Number: WBL-95-156 REV002 55
Section 4 Maintenance
First Rinse Process
The screen will display the line rinsing progress for each line
where fresh water is flushed through all product lines then
automatically proceed to Prime lines with cleaner for the
CIP (Clean In Place) process.
Cleaning Process
The screen will display the line cleaning progress for each
line then automatically proceed to the first Soak Time
screen and second Rinse Process.
Second Rinse Process
The screen will display the line rinsing progress for each line
where fresh water is flushed through all product lines then
automatically proceed to the first Sanitizing Process.
Sanitation Process
The screen will display the line sanitizing progress for each
line then automatically proceed to the Soak Time Screen.
Second Soak Time
After the sanitizer solution has run through and flooded all
product lines the unit will go into a hold displayed on screen.
Once the timer finishes counting down it will automatically
proceed to sanitize the lines and hold a final time. After the
final hold time the unit will proceed to the Final Rinse Process.
Final Rinse Process
The screen will display the line rinsing progress for each line
where fresh water is flushed through all product lines then
prompt the user to proceed to Prime lines with product.

Multiplex FreshBlender Specifications

General

Brand	Multiplex
Model	FreshBlender
Category	Dispenser
Language	English