Part Number: WBL-95-156 REV002 57
Section 4 Maintenance
Clean Dispense Area
n
Warning
NEVER use a scrub brush on flavor dispenser nozzles -
This will damage the machine!
1. Using the spray bottle filled with cleaner/sanitizer solution
thoroughly spray down the dispense nozzle and drain area.
Important
Make sure to saturate the dispense nozzles and ice
dispense opening with solution.
2. Using a clean towel saturated with cleaner/sanitizer
solution, wrap the towel around your finger and
thoroughly swab out each flavor dispense nozzle making
sure no product residue is left around the openings.
3. Wipe the dispense and drain area with a clean towel
saturated with dish detergent cleaner solution.
4. Completely wipe down dispense and drain area with
clean sanitized towel.
5. Press Next when ready to continue.
Clean Blender Area
n
Warning
The blender station contains sharp moving parts. Wear
gloves to protect hands.
1. Spray and wipe the blender and area with a clean towel
saturated with cleaner/sanitizer solution.
2. Press Confirm button to lower the blender.
Clean Blender
1. Spray and wipe the blender shaft and top of blender
cap with a clean towel saturated with solution.
2. Lift the blender cap, spray and wipe down top of blade
housing and bottom of blender cap.
3. Press Confirm button when done to raise blender.
Clean Front Door Section
1. Spray and wipe down all surfaces of the door and areas
to the right of the door with a clean towel saturated
with cleaner/sanitizer solution.
2. Press Next when ready to continue.