Multiplex FreshBlender User Manual

58 Part Number: WBL-95-156 REV002
Maintenance Section 4
Sanitize Dispense Area
1. Using the spray bottle filled with cleaner/sanitizer
solution, thoroughly spray down the dispense nozzle
and drain area
Important
Make sure to saturate the dispense nozzles and ice
dispense opening with sanitizer solution.
2. Using the spray bottle of cleaner/sanitizer solution,
thoroughly spray the dispense nozzle making sure to
cover each of the openings.
3. Wipe the dispense and drain area with a clean towel
saturated with sanitizer solution.
4. Do not wipe sanitizer off and allow to air dry.
5. Press Next when ready to continue.
Sanitize Blender Area
1. Spray and wipe the blender and area with a clean towel
saturated with cleaner/sanitizer solution.
2. Press Confirm button when ready to lower the blender.
Sanitize Blender
1. Spray and wipe the blender shaft and top of blender
cap with a clean towel saturated with solution.
2. Lift the blender cap, spray and wipe down top of blade
housing and bottom of blender cap.
Important
Allow to air dry, DO NOT wipe off sanitizer!
3. Press Confirm button when done to raise blender.
Sanitize Front Door Section
1. Spray and wipe all surfaces of the door and areas to the
right of the door with a clean towel saturated with solution.
Important
Allow to air dry, DO NOT wipe off sanitizer!
2. Press Next when ready to continue

Multiplex FreshBlender Specifications

General

Brand	Multiplex
Model	FreshBlender
Category	Dispenser
Language	English