Multitech MultiConnect - Page 169

Chapter 16 – SNTP Client
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 169
Optional Prerequisites: The following configurations are optional and can be used when you want
the host device to enable daylight savings mode.
• Enable the Daylight Savings Mode
# set sntp-client daylight-saving <enable>
• Set the Daylight Savings Offset value
# set sntp-client daylight-saving offset <+60>
• Set the Start Ordinal/week for Daylight Savings.
# set sntp-client daylight-saving start-ordinal <First>
• Set the Start Weekday for Daylight Savings.
# set sntp-client daylight-saving start-weekday <sunday>
• Set the Start Month for Daylight Savings.
# set sntp-client daylight-saving start-month <april>
• Set the Start Time for Daylight Savings.
# set sntp-client daylight-saving start-time <10:00>
• Set the End Ordinal/ week for Daylight Savings.
# set sntp-client daylight-saving end-ordinal <Last
• Set the End Weekday for Daylight Savings
# set sntp-client daylight-saving end-weekday <sunday>
• Set the End Month for Daylight Savings.
# set sntp-client daylight-saving end-month <october>
• Set the End Time for Daylight Savings.
# set sntp-client daylight-saving end-time <10:00>