Multitech MultiConnect - Page 54

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 54
POP3 Client Commands – Setup
Command Syntax recv-mail top <index> <n>
Description
Displays the first <n> lines of the mail corresponding to index.
If n is greater the email size then the whole message is displayed.
Default Value
-
Success
OK
Error 1. Too few arguments
Usage: recv-mail top [index]
Type 'recv-mail top' for more information
POP3 Client Commands – Show
Command Syntax recv-mail unique-id-listing [index]
Description
Displays the unique ID listing from the server in the order below: <index of
the mail> <unique id>.
If index is specified, only the corresponding unique ID is displayed.
If index is not specified, all unique IDs in the mail box are displayed.
Default Value
-
Success
OK
Error 1. Too few arguments
Usage: recv-mail unique-id-listing [index]
Type 'recv-mail ?' for more information
Command Syntax recv-mail stat [index]
Description
Displays the statistics of an email or emails for a given index.
Default Value
-
Success
OK
Error 1. Too few arguments
Usage: recv-mail stat [index]
Type 'recv-mail ?' for more information
Command Syntax show recv-mail configuration
Description
Displays the recv-mail related configuration.
Default Value
-
Success
OK
Error 1. Too few arguments
Possible value(s) are configuration