multivac P200 - Page 3

Contents
03.06.2014 3
2.3
Control terminal........................................................................................................ 23
2.4 Display ..................................................................................................................... 24
2.5 Process sequence.................................................................................................... 25
2.6 Times which have to be set...................................................................................... 26
2.7 Technical specifications ........................................................................................... 27
3 Start-up............................................................................................................................. 31
3.1 Setting up the machine and putting it into operation ................................................ 31
4 Operation ......................................................................................................................... 41
4.1 Opening and closing the chamber lid....................................................................... 41
4.2 Switching on the machine ........................................................................................ 42
4.3 Switching off the machine ........................................................................................ 42
4.4 Setting the times ...................................................................................................... 43
4.5 Packing products...................................................................................................... 43
4.6 Aborting evacuation ................................................................................................. 46
4.7 Aborting packaging procedure ................................................................................. 46
4.8 Working with recipes ................................................................................................ 46
4.8.1 Load recipe .................................................................................................. 46
4.8.2 Save recipe .................................................................................................. 47
4.9 Perform pump protection function ............................................................................ 47
5 Adjustment work and setup ........................................................................................... 48
5.1 Insert and remove the diagonal insert...................................................................... 48
6 Cleaning ........................................................................................................................... 49
6.1 Notes on cleaning .................................................................................................... 49
6.1.1 Instructions for creating company cleaning guidelines................................. 49
6.1.2 Instructions for maintaining the machine's value ......................................... 50
6.1.3 Instructions on the handling of cleansers..................................................... 51
6.1.4 Instructions on the handling of disinfectants ................................................ 51
6.1.5 Instructions on the handling of anti-corrosion agents and lubricants ........... 52
6.1.6 Instructions on the handling of cleaning devices.......................................... 52
6.2 Cleaning recommendations ..................................................................................... 52
6.3 Care products table.................................................................................................. 55
7 Maintenance.....................................................................................................................58
7.1 Maintenance schedule ............................................................................................. 58
7.2 Service recommendation ......................................................................................... 59
7.2.1 Vacuum pump - Perform the pump protection function................................ 59
7.2.2 Entire machine - Visual inspection............................................................... 59
7.2.3 Entire machine - Alkaline cleaning and disinfection..................................... 60
7.2.4 Entire machine - Perform a wipe test ........................................................... 60
7.2.5 Entire machine - Acidic cleaning and disinfection........................................ 60
7.2.6 Connections - Visual inspection................................................................... 60
7.2.7 Vacuum pump - Checking oil level, topping up ............................................ 60
7.2.8 Vacuum pump - Oil change.......................................................................... 61
7.2.9 Vacuum pump - Exchanging the air de-oiling element................................. 61
7.2.10 Entire machine - Check the age................................................................... 61