EasyManua.ls Logo

multivac P200 - Disposal; Disposing of the Machine; Dispose of Operating Materials; 10.2.1 Disposing of Oil and Grease

multivac P200
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disposal
80 03.06.2014
10 Disposal
10.1 Disposing of the machine
Info
Sealing bars can be reused on other machines of the same se-
ries.
If disposal of the machine is not handled by the manufacturer,
dispose of the machine as described below.
¾ Disconnect the machine from the mains electricity, see Section 9
"SHUTDOWN, TRANSPORT, STORAGE".
DANGER
Danger of explosion!
The gas strut on the chamber lid is under very high pressure.
Opening the gas strut, or excessive heating of it, can lead to an
explosion. Explosions can cause serious injuries or even death.
¾ Do NOT open the gas strut.
¾ Do not heat the gas strut excessively, see 'Technical Specifica-
tions'.
¾ Deposit the gas strut at a suitable collection point, or arrange for
it to be disposed of by the manufacturer.
¾ Dispose of the materials properly, observing all legal and com-
pany-internal regulations regarding environmental protection.
10.2 Dispose of operating materials
10.2.1 Disposing of oil and grease
NOTICE Protect the environment!
Operating materials and working equipment are environmentally
harmful.
Improper disposal is harmful to the environment.
¾ Handle operating materials and working equipment properly.
¾ Dispose of operating materials and working equipment at suit-
able collection points.
¾ Observe the environmental directives.
¾ Handle operating materials and working equipment properly and
dispose of them in a professional manner.

Table of Contents

Related product manuals