Need help?Do you have a question about the MultiWave Sensors Smart Aligner and is the answer not in the manual?
General| Brand | MultiWave Sensors |
|---|---|
| Model | Smart Aligner |
| Category | GPS |
| Language | English |
Describes the Smart Aligner Tool and the Universal Mounting Bracket.
Covers the LCD display, power button, menu buttons, and tether line connection.
Sets GPS antennas in a forward baseline for optimal azimuth measurement.
Extends GPS antennas to the left for multipath mitigation and accurate measurement.
Extends GPS antennas to the right for multipath mitigation and accurate measurement.
Lists the 18 possible ways the Tool and Bracket can be attached to an antenna.
Explains automatic compensation of Azimuth, Tilt, and Roll based on configuration.
Describes the main and secondary screens, showing coordinates, measurements, and status.
Guides on navigating menus and adjusting settings like Location Format, Units, Sound, and Backlight.
How to view firmware version, serial number, GLN, and GPS satellite information.
Accessing live Latitude, Longitude, Elevation, AGL, Tilt, and Roll data.
Describes the workflow from connecting to the tool to creating reports.
Details the alignment process, verification, accepting results, and preparing reports with photos.
Explains how to set and use Azimuth Tolerance in CSV files for alignment alerts.
Addresses issues like no azimuth solution, "Position Arms" message, and WiFi connection problems.
To Next Page
