7
Preparation
Setting the paper size
Setting the paper size that has been loaded into the cassette and the bypass tray.
This operation is not required if you are loading the same size paper that was previously
used in the cassette.
1
Press [Setting] on the My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until the My MFP Menu
screen is displayed.
2
Press [Paper Settings].
3
Select the cassette.
“Cassette 3” and “Cassette 4” are displayed only when the optional cassettes have been
attached to the machine.
4
Select the paper size, and press [Enter].
To Next Page
Loading...
Need help?
General
