Section 40 00-02-0716
2013-06-03 - 28 -
THUR SELECT: Set this to YES if you want to start your engine on THURSDAY. Set it
to NO if you want to lock out the start time on this day. Factory set to NO.
FRI SELECT: Set this to YES if you want to start your engine on FRIDAY. Set it to NO
if you want to lock out the start time on this day. Factory set to NO.
SAT SELECT: Set this to YES if you want to start your engine on SATURDAY. Set it
to NO if you want to lock out the start time on this day. Factory set to NO.
CLCK A RUN TM: This set-point lets you set in the amount of time you would like your
engine to run on your first start time. You have 12 available start times per day (A – L)
CLCK A HR: This set-point lets you set the clock hour you would like to start in 24hr
format. For example, if you want to start in the 3 o'clock in the afternoon hour, set it to
CLCK A MIN: This set-point lets you set the clock minute you would like to start. For
example, if you want to start at 8:30 in the morning, you would adjust this until it read
30 in the minute portion Factory set to 00.
CLCK B RUN TM: This set-point lets you set in the amount of time you would like your
engine to run on your first start time. You have 12 available start times per day (A – L).
CLCK B HR: This set-point lets you set the clock hour you would like to start in 24hr
format. For example, if you want to start in the 3 o'clock in the afternoon hour, set it to
CLCK B MIN: This set-point lets you set the clock minute you would like to start. For
example, if you want to start at 8:30 in the morning, you would adjust this until it read
30 in the minute portion Factory set to 00.
CLCK C RUN TM: This set-point lets you set in the amount of time you would like your
engine to run on your first start time. You have 12 available start times per day (A – L).
CLCK C HR: This set-point lets you set the clock hour you would like to start in 24hr
format. For example, if you want to start in the 3 o'clock in the afternoon hour, set it to
CLCK C MIN: This set-point lets you set the clock minute you would like to start. For
example, if you want to start at 8:30 in the morning, you would adjust this until it read
30 in the minute portion Factory set to 00.
CLCK D RUN TM: This set-point lets you set in the amount of time you would like your
engine to run on your first start time. You have 12 available start times per day (A – L).
CLCK D HR: This set-point lets you set the clock hour you would like to start in 24hr
format. For example, if you want to start in the 3 o'clock in the afternoon hour, set it to
CLCK D MIN: This set-point lets you set the clock minute you would like to start. For
example, if you want to start at 8:30 in the morning, you would adjust this until it read
30 in the minute portion Factory set to 00.
CLCK E RUN TM: This set-point lets you set in the amount of time you would like your
engine to run on your first start time. You have 12 available start times per day (A – L).
CLCK E HR: This set-point lets you set the clock hour you would like to start in 24hr
format. For example, if you want to start in the 3 o'clock in the afternoon hour, set it to
To Next Page
Loading...
Need help?
General
