40 When using High-capacity ink pack adapter for the first time
1 About the high-capacity ink pack adapter
To install the 1,000 ml ink pack to the high-capacity ink pack adapter, refer to the operation manual included with the high-
capacity ink pack adapter.
The air inside the high-capacity ink pack adapter may go into Ink tubes and cause nozzle clogging. In the following cases,
perform the initial ink replenishment from the printer driver or the MSM remote panel.
• When using a high-capacity ink pack adapter for the first time on the printer whose ink is filled.
• When replacing a high-capacity ink pack adapter that has been in use with a new one.
See the following for the procedure of the initial ink charging.
"Initial charging" on page 76
Once you have removed and inserted the high-capacity ink pack adapter for a certain times, the plug needs to be replaced.
For related procedures, refer to the following.
"Replacing the plug for the high-capacity ink pack adapter" on page 68
When using High-capacity ink pack adapter for the first time
About replacing the plug
About the high-capacity ink pack adapter
To Next Page
Loading...
