50
3 Maintenance
To maintain the performance of this product, please conduct maintenance by yourself.
The types of maintenance are shown next.
Before and after daily operation "Agitating ink cartridges" on page 52
"Nozzle check and cleaning" on page 32
Based on your usage condition "Head cleaning" on page 58
"Replacing ink cartridge" on page 54
"Emptying waste ink tank" on page 56
"Replacing absorption material for the
flushing box" on page 65
"Replacing cutter" on page 67
"Replacing the plug for the high-capacity
ink pack adapter" on page 68
Weekly "Cleaning of cleaning wiper" on page 60
"Cleaning of print head circumference" on
page 62
Monthly "Inside cleaning" on page 64
When not used for a week or more Weekly "Head cleaning" on page 58
Important!
Since a service technician has to handle following cases, please contact your local MUTOH dealer.
• Emergency mode is happening repeatedly.
• The message to notify the life of print head and various motors is displayed in MSM.
"Handling messages/error messages" on page 80
To Next Page
Loading...
