37
How to Test Your Blood Glucose Level
2. Load a new sterile lancet directly
into the bottom of lancet carrier.
Note: In case you accidently cock
the device at this point, press the
release button before you move on.
3. While holding the lancet rmly,
remove the lancet cap; be careful
not to touch the lancet tip.
4. Put the cap of the lancing device
back on and turn it clockwise until it
is fully into place.
5. The lancing device can be set to the
sensitivity of your skin. You can
adjust the tip to 5 di erent lancing
depths. Twist the cap end in the
appropriate direction until the arrow
is pointing to the number for the
lancing depth you want.
1-2 for soft or thin skin,
3 for average skin,
4-5 for thick or calloused skin.
To Next Page
Loading...
