EasyManua.ls Logo

nal von minden Reactif Touch - Page 69

nal von minden Reactif Touch
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
selec on areas on the display will be disabled un l the ba eries are replaced. For inst-
ruc ons regarding how to change the ba eries, refer to Changing Ba eries in Sec on 10
Cleaning and Maintenance.
Paper-out Icon
A paper icon will fl ash in the bo om of the  tle bar when the printer paper/label roll
needs replacing. An advisory message will be displayed on the ini al screen. Replace
with new paper or label roll, as instructed in Loading the Printer Paper or Label Roll of
Sec on 3 Ini al Startup.
Dashes in Displays
Dashes are displayed in the Results screens and on printouts when no text has been
entered for a fi eld enabled in the Sec on 7 Analyzer Setup.
Dashes may appear next to Color and Clarity on test result printouts. This occurs when
the instrument is powered by ba eries. Color and Clarity are selected in the Analyzer
Setup, but no selec ons have been recorded on the Select Appearance screens before
me-out.
The  me-out on these screens is designed to ensure that ba ery life is preserved. The
Color and Clarity descrip on may be added to the printout in wri ng, if needed.
Irregular or Slow Movement of Test Table
If movement of the test table is irregular or slow, this may be caused by:
1. Heavy buildup of dried urine on the test table. Clean the test table and insert as
described in Sec on 10 Cleaning and Maintenance, Periodic Cleaning of Test Table.
2. Low ba ery power. Replace the ba eries as described in Sec on 10, Cleaning and
Maintenance.
Calling for Assistance
If the Reac f Touch Urine Analyzer is displaying correc ve ac ons for a detected prob-
lem, please carry out the displayed instruc ons before calling for assistance. If this does
not correct the problem or no instruc ons are displayed, contact your local technical
support provider. For assistance with a displayed error, please have the error informa on
ready (this will assist the Customer Service and Support Center to deal with the inquiry
as quickly as possible).
For customer support, please contact your local technical support provider or distributor.