EN
W415-2350 / 10.28.19
33
maintenance
Having removed the door, lay on a smooth fl at surface,
face down. There are 4 glass retainers that need to be
bent away from the glass to release it from the frame.
Do not pry on the glass.
When replacing DO NOT SUBSTITUTE MATERIAL,
replace the gasket (W562-0008) and the glass (W300-
0088). Set new glass into the frame and gently bend
tabs into the gasket to secure.
NOTE: Care must be taken when removing
and disposing of any broken glass or damaged
components. Be sure to vacuum up any broken
glass from inside the appliance before operation.
GLASS
RETAINERS
GASKET*
GLASS
TOP
9.3 door glass replacement
!
WARNING
• Do not use substitute materials.
• Glass may be hot. Do not touch glass until cooled.
• Care must be taken when removing and disposing of any broken door glass or damaged components. Be
sure to vacuum up any broken glass from inside appliance before operation.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, broken, or scratched.
Replacement glass/frame assembly shall be replaced as a complete unit as supplied by the appliance
manufacturer.
To Next Page
Loading...
Need help?
General
