EN
W415-2350 / 10.28.19
23
fi nishing
5.2 safety barrier installation and removal
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance
and must be installed.
Before the glass door can be removed, the front frame and safety screen must be removed. Lift the front frame
up and away from the appliance. Remove the two side screws securing the safety screen. Lift and tilt the bottom
forward and remove from the appliance.
SAFETY
SCREEN
SAFETY
SCREEN
SAFETY
SCREEN
!
WARNING
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings,
operation of louvres, or doors/access for service. Observe all clearances when applying combustible
materials.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
To Next Page
Loading...
Need help?
General
