EasyManua.ls Logo

NARDA PMM 9010F - Page 116

Default Icon
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11-4 PMM 9030/9060/9180 Frequency Extension
Noise level
(Preselector ON)
(Preamplifier OFF)
30 to 300 MHz (120 kHz BW)
300 MHz to 3 GHz (120 kHz BW)
< 1 dBµV (AV)
< 4 dBµV (AV)
Noise level (Preamplifier ON)
30 to 300 MHz (120 kHz BW)
300 MHz to 3 GHz (120 kHz BW)
< -5 dBµV (AV)
< -2 dBµV (AV)
Spurious response
< 10 dBµV, < 15 dBµV above 1 GHz
Measuring Detectors
Peak, Quasi-peak, Average, RMS, C-Avg, C-RMS,
Smart Detector
Level meas. time
Peak, Quasi-peak, RMS and Average
(simultaneous detectors)
1 ms to 30 sec. (CISPR 16-1-1 default)
Display units
dBm, dBµV (as stand-alone);
dBm, dBµV, dBµV/m, dBmA, dBmA/m, dBpW (through 9010
SW Utility on PC)
Spectrum
Span/division
Up to 300 MHz
Measurement accuracy
S/N > 20 dB
30 to 1000 MHz ± 1,0 dB
1 to 3 GHz ± 1,5 dB
Demodulation
AM demodulator (through PMM 9010 and PMM 9010/03P/
30P/60P)
I/O Interface Out
High Speed Optical Link;
RS232 (service only)
Operating temperature
0° to 40°C
Power supply
10 - 15 Volt DC, 2,5A; Li-Ion rechargeable and
interchangeable battery (4 h operations, average);
Dimensions
235 x 105 x 105 mm
Weight
2,0 kg

Table of Contents

Related product manuals