9-4 General Information
The 9010/60P is Full Compliance up to 30 MHz (A and B band) and Pre-
Compliance 30 MHz up to 6 GHz (CDE bands).
For what is concerning the use in full compliance A and B bands refer
to the PMM 9010.
Refer to the PMM 9030/9060/9180 chapter for the main functions are
included in Radiated emission measurements.
All measurements performed by the PMM 9010/03P/30P/60P are
according to the most accepted standards like: IEC, CISPR, EN
(EuroNorm), FCC, VDE, ….
Thanks to its built-in tracking generator up to 30MHz the PMM
9010/03P/30P/60P is also suitable for designing, characterizing and testing
RF filters, transducers and other components.
The PMM 9010/03P/30P/60P has been designed adopting an innovative
philosophy made possible only in the recent years by the availability of
superior technology components. This equipment is fully digital but the
input preselector and attenuator – and, of course, the output stage of the
internal reference tracking generator - and therefore combines into a pure
EMI Receiver and Signal Analyzer the precision and accuracy of a numeric
approach, with flexibility and user friendly approach typical of a modern
instrument.
9.4 Instrument Items
PMM 9010/03P/30P/60P includes the following items:
• PMM EMI Receiver;
• External power supply/battery charger;
• Flexible black cover/accessories holding;
• BNC-BNC coaxial cable 2m length;
• N male to BNC fem. Adapter
• RS232 cable, 2m;
• USB cable, 2m;
• Operating manual;
• PMM 9010 Utility Software on Software Media;
• Certificate of Compliance;
• Return for Repair Form.
9.5 Optional
accessories
• BP-02 Li-ion battery pack;
• Same optional accessories of 9010 unit (See par. 1.5)
9.6 Other accessories
• Same other accessories of 9010 unit (See par. 1.6)
To Next Page
Loading...
