NARDA PMM 9010F - 13.2 Pre-conditions and Settings

13-2 APD Mode Operating Instructions
Typical APD Noise
Curve with PMM
receiver
Due to the good
performances of PMM
receiver the noise
curve is very steep
13.2 Pre-conditions and
Settings
The APD function has been added to previous 9010 detection functions
starting from 9010 FW Rel. 1.70 and 9030 FW Rel. 1.14, so please check
about having these or newer FW releases on your equipments from Start-Up
Screen at power-on, as shown in following picture.
On the contrary please access NARDA web site to download latest available
FW release and update your unit.