Nateks VC-91-2 User Manual

38
PSTN Call Allow VoIP In
As user making a call through PSTN port, it allows another
call wait from VoIP.
End of VC-91-1/VC-92-1
Only VC-91-2/VC-92-2
Item Description
Enable
E
nable a line; if some lines are not used, disable them (Pause
Function).
Hot Line
When the user picks up the phone, VoiceCom90
automatically
dials your assigned Hot Line number. The lines cannot dial
when in Hot Line mode,.
Hot Line No. Fill in the Hot Line number for an automatic dialing function.
Warm Line (Hot Line Delay)
When the Warm Line function is in use,
user can dial a number
before Hot Line is working. Otherwise VoiceCom90
will
divert incoming calls from an outside line
to the Hot Line
Number after a set wait time.
End of VC-91-2/VC-92-2
Only VC-92-3
Item Description
Enable
Enable a line; if some lines are not used, disable them (Pa
use
Function).

Nateks VC-91-2 Specifications

General

Brand	Nateks
Model	VC-91-2
Category	Gateway
Language	English