EasyManuals Logo

Nateks VC-91-2 User Manual

Nateks VC-91-2
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
39
Hot Line
When the user picks up the phone, VoiceCom90
automatically
dials your assigned Hot Line number. The lines cannot dial
when in Hot Line mode,.
Hot Line No. Fill in the Hot Line number for an automatic dialing function.
Warm Line (Hot Line Delay)
When the Warm Line function is in use,
user can dial a number
before Hot Line is working. Otherwise VoiceCom90
will
divert incoming calls from an outside line
to the Hot Line
Number after a set wait time.
Dial-Out Prefix
It is the number d
ialed automatically by the system when the
FXO interface diverts a call to the PSTN by VoIP.
FXO Line Default Dial-Out
This will take effect as FXO Line VoIP call in option
is set to
Default Dial-Out
. When some one makes a call to this FXO
port from Inter
net, it will dial to PSTN with that default
number.
Item Description
FXO Line VoIP call in option
Caller Indicate Dial-
Out: When some one makes a call to this
FXO port from Internet, it will dial to PSTN with the number
assigned in SIP packet.
Default Dial-Out
: When some one makes a call to this FXO
port from Internet, it will dial to PSTN with the number filled
in “FXO Line Default Dial-Out”.
Trunk Incoming Prompt
Voice
Select the greeting (must use the IVR 132 function to record a
voice file) when FXO receives an inbound call.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nateks VC-91-2 and is the answer not in the manual?

Nateks VC-91-2 Specifications

General IconGeneral
BrandNateks
ModelVC-91-2
CategoryGateway
LanguageEnglish