VX150 TO VX2 TROUBLESHOOTING MANUAL RESPONDING TO ALARMS
PAGE 3.1.42 VERSION 2.0 2023-04-20
12. Obtain the replacement Analog Audio PWB (Nautel Part # NAPI189).
13. Remove the Push Button Connector Locks from the new Analog Audio PWB (if present).
14. Install the Analog Audio PWB by reversing Step 4 to Step 11. Torque all hardware to 6 in-lbs
(0.68 N-m).
15. Install the Push Button Connector Locks into the XLR connectors.
16. Return the transmitter to operation.
To Next Page
Loading...
