VX150 TO VX2 TROUBLESHOOTING MANUAL RESPONDING TO ALARMS
VERSION 2.0 2023-04-20 PAGE 3.1.47
11. Obtain a replacement power supply (Nautel part # UG130).
12. Install the power supply by reversing Step 8 to Step 10. Torque hardware to 6 in-lbs (0.68 N-m).
13. Secure wiring with new cable ties (Nautel Part # HT77, found in the ancillary kit).
14. Re-install the Exciter/Analog Audio PWB Support Bracket (Nautel part # 235-8227).
15. Re-install the Exciter and Analog Audio PWBs.
16. Return the transmitter to operation.
To Next Page
Loading...
