EasyManua.ls Logo

Nautel VX150 - User Manual

Nautel VX150
182 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3: TROUBLESHOOTING MANUAL
VX150 TO VX2
FM BROADCASTTRANSMITTER
Document ID: NHB-VX150-VX2-TRB
Version: 2.0
Issue Date: 2023-04-20
Status: Standard

Table of Contents

Other manuals for Nautel VX150

Questions and Answers

  • J
    Jeremy GonzalezSep 8, 2025
    Why is the analog left audio low on my Nautel Transmitter?
    • C
      Christina LongSep 8, 2025
      If the Nautel Transmitter shows 'Analog Left Low Audio', it indicates an interruption in audio distribution to the transmitter. Check the audio feed connected to the Analog Left input and verify that the threshold level programmed in the active preset is below the normal audio input level by checking the Analog Left meter.
  • A
    Alyssa WaltonSep 10, 2025
    What causes analog right audio low on a Nautel VX150 Transmitter?
    • D
      Daniel MarquezSep 10, 2025
      If the Nautel Transmitter displays 'Analog Right Audio Low', this is due to an interruption in audio distribution to the transmitter. Check the audio feed connected to the Analog Right input. Also, verify that the threshold level programmed in the active preset is below the normal audio input level by checking the Analog Right meter.
  • O
    Olivia ParkSep 12, 2025
    Why is AES1/2 left audio low on Nautel Transmitter?
    • B
      Brandi PattersonSep 12, 2025
      If the Nautel Transmitter displays 'AES1/2 Left Low Audio', there may be an interruption in audio distribution to the transmitter. Check the audio feed connected to the AES1/2 input. Verify that the threshold level programmed in the active preset is below the normal audio input level by checking the AES1/2 Left meter.
  • W
    walkerrobertSep 14, 2025
    How to resolve boot configuration failed on Nautel VX150 Transmitter?
    • T
      Timothy WolfeSep 14, 2025
      If the Nautel Transmitter displays 'Boot Configuration Failed', it indicates damage to configuration files or firmware stored on the SD Card. Replace the SD Card or run a Software Update.
  • C
    Courtney FullerSep 15, 2025
    What to do if Nautel Transmitter says PS not installed?
    • R
      Robert DavisSep 16, 2025
      If the Nautel Transmitter displays 'PS Not Installed', it means that the PA power supply has been removed. Install the power supply, and verify there is no obstruction in the power supply connector.
  • S
    Steve HaynesSep 18, 2025
    How to troubleshoot Analog Audio PWB +12V on Nautel Transmitter?
    • L
      Lindsey MckenzieSep 18, 2025
      If the Nautel Transmitter indicates 'Analog Audio PWB +12V', it suggests a connection failure between the Exciter and Analog Audio PWB, or a component failure on the Analog Audio PWB. Check the connection between the Exciter and Analog Audio PWB and measure the voltage at TP2 on the Analog Audio PWB.

Nautel VX150 Specifications

General IconGeneral
Power Output150 kW
ModulationAM
Audio InputsAnalog
CoolingForced air
DimensionsVaries depending on configuration. Consult factory.
WeightVaries depending on configuration

Related product manuals