Nautilus E916 - Page 32

32
Left Swing Arm to Foot Link Connection:
Cable Connections - EV916
CONNECT THE FOOTLINK AND SWING ARM
CABLE (PN 40470) USING M/F CONNECTORS FOR
CORRESPONDING COLORS. (SEE FIGURE 1.)
CAREFULLY INSERT THE CONNECTORS AND
ZIP-TIED LOOP INTO THE SWING ARM (PN
40312) TUBE OPENING. (SEE FIGURE 2.)
NOTE: If connectors are not inserted
into the Swing Arm tube, they will
be damaged during use!
Figure 1
Figure
2
REINSTALL THE SWING ARM RUBBER GROMMET
(PN 41269), AND INSERT ANY REMAINING SLACK
CABLE (PN 40470) INTO EITHER TUBE. MAKE SURE
THE SWING ARM GROMMET (PN 41269) IS FULLY
INSTALLED AND THAT ONLY THE SHEATHED CABLE
(PN 40470) IS EXPOSED. (SEE FIGURE 3.)
Figure 3
Footlink
Cable
Swing Arm
Cable
3/4 inch
Loop
Length
Swing Arm
Connector
Footlink
Connector
Swing Arm
Grommet