NCR CX7 Series User Manual

3-39 Operation and Cleaning
Cleaning the Sensor
Before each authentication, it is recommended that the user first clean the sensor. Place
adhesive tape onto the sensor and then pull it off. This assures that residue from
previous usage is removed.
Caution: Do not use abrasive materials to clean the sensor.
Software Drivers
The CX7 biometrics reader is a digitalPersona U.ARE.U 4500 Module. Please visit the
Crossmatch website for drivers and application developer tools.
https://www.crossmatch.com/company/support/request/

NCR CX7 Series Specifications

General

Brand	NCR
Model	CX7 Series
Category	Touch terminals
Language	English