NCR CX7 Series User Manual

Chapter 7: BIOS Setup
Entering Setup
1. Connect an alphanumeric USB keyboard to the terminal.
2. Apply power to the terminal.
3.
When you see the NCR logo displayed, press [Del] or [F2].
Selecting Menu Options
The following keyboard controls are used to select the various menu options and to
make changes to their values.
• Use the arrow keys to select (highlight) options and menu screens.
• Use the [Enter] key to select a submenu.
• Use the [+] and [-] keys to change field values.
• To view help information on the possible selections for the highlighted item, press
[F1].
• To save the changes, move the cursor to the Save and Exit Menu, select Save
Changes & Reset, and press [Enter].
Restoring Factory Settings
To reset all values to their default settings, press [F3] and then [Enter] when the
confirmation message is displayed. The terminal automatically loads the BIOS default
values. To save the factory default values, go to the Save and Exit Menu, select Save
Changes & Reset, and select [Enter].

NCR CX7 Series Specifications

General

Brand	NCR
Model	CX7 Series
Category	Touch terminals
Language	English