NCR CX7 Series - Using the Windows Flash Executable; Close all running programs; Right-click on the file and select Run as administrator.; When prompted, press a key

8-82 BIOS Updating Procedure
Using the Windows Flash Executable
Note: Close all running programs prior to updating the BIOS.
To run the executable, follow these steps:
1.
Right–click on the file and select Run as administrator.
2. When prompted, press a key to initiate the flash update. The terminal will reboot
after the flash process has completed.
Caution: The reboot is important to ensure the BIOS initializes properly. Do not
interrupt the reboot process.