Disk Image Backup and Recovery Tool 3-35
Main Screen
When the terminal boots the Main Screen is displayed.
Check and Repair Disk
This button runs Checkdisk, which checks the consistency of the HDD/SSD and the
Windows file system. Failures can occurs in the Windows file system and prevent
Windows from starting. Checkdisk analyzes the failures and fixes them in most cases.
This function runs in a Windows Command Box.
Save or Load Image
This button opens the Backup and Recovery screen.
Change Settings
This button opens a dialog screen to let you set/change the password and to configure
the network settings.
Shutdown or Reboot
This button opens the screen to properly Shutdown and Reboot the POS.
System Information
This is where useful information of the POS is displayed, such as Serial Number and
Image Names.
To Next Page
Loading...
Need help?
General
