7-60 Cleaning
Cleaning the Cabinet
1. Disconnect the unit from the power outlet before cleaning.
2. Wipe the cabinet using a non-abrasive cloth (microfiber cleaning cloth or cloth
towel) dampened with soap and water solution.
Warning: Do not use alcohol (methyl, ethyl, or isopropyl) or any strong
dissolvent. Do not use thinner or benzene, abrasive cleaners (powders), abrasive
cleaning materials (scrub brush, scouring pad), or compressed air. Do not use
any other types of cleaners such as vinegar, solvents, degreasers, or ammonia-
based cleaners. These can damage the unit.
Warning: Avoid getting liquids inside the unit. If liquid does get inside, have a
qualified service technician check it before you power it on again.
3. Wipe the cabinet using a clean and dry lint-free cloth.
4. Remove external dust around the cooling vents.
To Previous Page
Loading...
