NCR RealPOS 40 - Page 112

6-18 Chapter 6: Solid State Drive Optimization
Oncethenormalizedvaluereaches1,thenumberwillnotdecrease,althoughitis
likelythatsignificantadditionalwearcanbeputonthedevice.UsetheNormalized
valueforthisattribute.
B8 – End to End Error Detection Count
Thisattributeisonlyavailablefor34nmdrivesandcountsthenumberoftimeserrors
areencounteredduringlogicalblockaddressing(LBA)tagchecksonthedatapath
withinthedrive.UsetheNormalizedvalueforthisattribute.
Export
Usethisfunctiontowritethedriveinformationandthe SMARTdatatoa.cvsfile.
BrowsetothedesiredlocationandclickSavetowritethedriveinformation.

Back
ClickBacktoreturntotheIntelSSDToolboxmainscreen.
Refresh
UsethisfunctiontoreloadtheSMARTdata.