NCR RealPOS 40 - Cabinet Security

1-10 Chapter 1: Product Overview
Current System
Operation
Suspect
Component
System State Power LED Disk Activity
LED
Corrective Action
BootTime Bootmedia
(HDD,LAN)
 ON OFF HDDisBootDevice:
1. CheckHDDstatusinBIOS
Setup
2. Checkconnectionsbetween
HDDandMotherboard
3. Replaceorre‐imageHDD
4. ReplaceMotherboard
LANisBootDevice:
1. CheckforLANlinkand
activityLEDsontheBack
Panel
2. CheckLANcable
3. ReplaceMotherboard

Cabinet Security
The7600haseasyaccesstotheinternalcomponents.However,thecasecanbe
securedtoafixedobject(desk,pole,etc)byattachingastandardKensingtonlockto
theSecurityHasp.Inadditionasmallpadlockcanbeattachedtothehasptoprevent
theunitfrombeingopened.
28569
Security Hasp
