NCR RealPOS 40 - Single Display Mode; Intel Graphics Controller Hot Keys

Chapter 2: Hardware Installation 2-25
Single Display Mode
1. SelectMonitor(orDigital Display).
2. Select
Apply.
3. Select
OKwithin15secondstoacceptthenewsettings.

4. Select
OKtoclosetheControlPanel.
Intel Graphics Controller Hot Keys
HotKeysprovidethesamefunctionalityastheIntelGraphicsControlPanelwith
specifickeystrokesonthekeyboard.ThesehotkeysarelistedintheIntelControl
PanelundertheHotKeystab.ThemostusefulHotKeysare:
[CTRL][ALT][F1]‐Monitorinsingledisplaymode
[CTRL][ALT][F4]‐DigitalDisplayinsingledisplaymode
Note: TheHotKeyscanbeusedtorecoverfromablankdisplayinWindows.Thisis
trueonlyifWindowsDesktoploadscompletely;meaning,ifWindowsiswaitingfora
login/passw
ordentryorifPlugandPlayiswaitingforoperatorinput,theHotkeys
arenotyetactive.
