7-94 Installing Optional Remote Peripherals
Installing a Transaction Printer
Note: This section discusses how to connect a remote printer. The printers can also be
integrated with the 7616 terminal using the Integration Trays. See the GMS Integration
Tray (7616-K300) or Hospitality Integration Tray (7616-K301) Kit Installations for more
information.
The printers can connect through a USB connector or an RS-232 connector. It receives
power through a Powered USB power cable.
USB Installation
Connect the Powered USB Printer Interface Cable to the USB Connector and Power
Connector on the printer and to the 24 V Powered USB Connector on the terminal.
To Next Page
Loading...
