13-178 Solid State Drive Optimization
2. Click Drive Details.
3. View the Model Number (Word 27-46). If the number contains G1, the Intel SSD is
50nm.
Running System Tuner with specific drivers
Intel SSD Toolbox System Tuner can configure Device Initiated Power Management
(DIPM) settings for the following configurations only:
• Intel
®
Rapid Storage Technology (Intel
®
RST) driver
• Microsoft AHCI driver in Windows 7
Known Issues
Error message: Cannot run Intel SSD Optimizer on RAID
configurations
Some systems without a RAID configuration display the following error message when
running Intel SSD Optimizer: Cannot run the Intel SSD Optimizer on RAID Configurations.
There is no workaround for this issue.
Not all drives in a RAID configuration are recognized by Intel SSD
Toolbox
Not all drives in a RAID configuration are recognized by Intel SSD Toolbox. Drive
details and SMART information may be obtained with another program.
Intel SSD Toolbox does not communicate with drives on some
systems
On some systems, Intel SSD Toolbox does communicate with drives and all functionality
is disabled. There is no workaround for this issue.
RAID volume may display extended serial number
When a RAID volume is selected on the home screen, the serial number may contain an
extended number of characters. There is no workaround for this issue.
SSD may report BAD_CONTEXT if Secure Erase operation is
interrupted
During a Secure Erase operation, if the SSD loses power or if the SSD is removed from
the system once the Secure Erase operation is 40% or more complete, the SSD may
report BAD_CONTEXT in the Serial Number field. There is no workaround for this
issue.
To Next Page
Loading...
