10-144 BIOS Setup
USB Configuration
Legacy USB Support [Enabled]
USB3.0 Support [Enabled]
EHCI Hand-off [Disabled]
Port 60/64 Emulation [Enabled]
USB transfer time-out [20 sec]
USB reset time-out [20 sec]
Device power-up delay [Auto]
Generic Storage Device 1.25 [Auto]
Info Report Configuration
Summary Screen [Disabled]
SMART Settings
Smart Self Test [Disabled]
System Super IO Configuration
Serial Port 1/A Configuration
Serial Port [Enabled]
I/O Base Address [0x3F8]
IRQ [IRQ4]
Device Mode [Standard Serial Po...]
Serial Port 2/B Configuration
Serial Port [Enabled]
I/O Base Address [0x2F8]
IRQ [IRQ3]
Device Mode [Standard Serial Po...]
Serial Port 3/C Configuration
Serial Port [Enabled]
I/O Base Address [0x2E8]
IRQ [IRQ11]
Device Mode [Standard Serial Po...]
To Next Page
Loading...
