BIOS Setup 10-149
CHAP Device (B0:D7:F0) [Disabled]
Thermal Device (B0:D4:F0) [Disabled]
Enable NB CRID [Disabled]
BDAT ACPI Table Support [Disabled]
Graphics Configuration
Graphics Turbo IMON Current 31
Primary Display [Auto]
Internal Graphics [Auto]
GTT Size [2MB]
Aperture Size [256MB]
DVM Pre-Allocated [64MB]
DVMT Total Gfx Mem [256MB]
Gfx Low Power Mode [Enabled]
Graphics Performance Analyzers [Disabled]
LCD Control
Primary IGFX Boot Display [VBIOS Default]
LCD Panel Type [VBIOS Default]
SDVO-LFP Panel Type [VBIOS Default]
Panel Scaling [Auto]
Backlight Control [PWM Inverted]
BIA [Auto]
Spread Spectrum Clock Chip [Off]
TV1 Standard [VBIOS Default]
TV2 Standard [VBIOS Default]
ALS Support [Disabled]
Active LFP [Int-LVDS]
Panel Color Depth [18 Bit]
DMI Configuration
DMI X4 Gen2
To Next Page
Loading...
